Skip to product information
1 of 5

ClodPi Labs

ClodPi ATOM Hub For Home Assistant with Raspberry Pi CM4 (32GB eMMC, 4GB RAM, WiFi, Bluetooth 5.0 and 2 x MGM210P)

ClodPi ATOM Hub For Home Assistant with Raspberry Pi CM4 (32GB eMMC, 4GB RAM, WiFi, Bluetooth 5.0 and 2 x MGM210P)

Regular price $199.00 USD
Regular price Sale price $199.00 USD
Sale Sold out
Tax included. Shipping calculated at checkout.

Shipping Starts by 25 December 2022

Specification

Processor & Carrier Board :
  • CM4 board-to-board connector
  • Supports direct boot from NVMe devices
  • Comes with CM4104032
    • Quad-core Cortex-A72 (ARMv8) 64-bit / 1.5 GHz
    • 4 GB RAM
    • 32 GB eMMC
    • 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac WiFi
    • Bluetooth 5.0

Integrated smart-home wireless (2 x Silicon Labs MGM210P):

MGM210P - 1:

  • Supports Zigbee 3.0
  • 2.4 GHz radio with TX power up to +20 dBm
  • 1024 KB flash program memory, 96 KB RAM data memory
  • Pre-installed with Zigbee 3.0 firmware (EZSP), can be upgraded

MGM210P - 2:

  • Supports OpenThread and Matter
  • 2.4 GHz radio with TX power up to +20 dBm
  • 1024 KB flash program memory, 96 KB RAM data memory
  • Pre-installed with OpenThread, can be upgraded

Expansion slot:

  • NVMe M.2 SSDs socket M-Key
  • Supports 2242, 2260, and 2280 modules
  • PCIe x1​

Ethernet:

  • Gigabit Ethernet

USB 2.0 Type-A host port:

  • Two

Push button and LEDs:

  • Push Button: Factory Reset
  • LED: Red (Power), Blue (Status)

Battery:

  • RTC backed a by CR2032 battery

Power:

  • 12 V / 2 A through barrel DC power jack (5.5 mm x 2.1 mm)
  • Typical power usage
    • Idle ~1.5 W
    • Idle with NVMe ~2.5 W
    • Load ~5-9 W"

Material

ASA Plastic, White color

Dimensions

150mm x 100mm x 30mm

Contains

1 x Atom Hub (Include CM4 32 GB eMMC, 4 GB RAM WiFi, BLE and Heatsink).

1 x 12V Power Adapter barrel DC power jack (5.5 mm x 2.1 mm)

1 x Getting start guide.

Shipping

First Batch : 25th December 2022

View full details

First batch shipping by December

Limited Edition

FAQs - ATOM Hub for Home Assistant

What are the similarities and differences between ClodPi Labs 'ATOM Hub for Home Assistant’ and the one from home-assistant.io?

The "ATOM Hub for Home Assistant" works on the same platform as the one from home-assistant.io with compatible Hardware (Raspberry Pi CM4 with 32GB eMMC, 4GB RAM, WiFi, Bluetooth 5.0 and 2 x MGM210P) and Enclosure is manufactured by ClodPi Labs making sure it is fully compatible with Home Assistant Operating System (HAOS) and ability to use all the Home Assistant features.

Is ATOM Hub compatible with the Home Assistant Operating System (HAOS)?

Yes, "ATOM Hub for Home Assistant" is compatible with the Home Assistant Operating System (HAOS) with the ability to use all the Home Assistant features.

Will the latest version of Home Assistant Operating System (HAOS) be automatically updated on ATOM Hub? If yes, how?

The latest updates notifications w.r.t HAOS will be displayed under Home Assistant web application > Settings.
To install the latest version, click on Update and proceed with install steps.

ATOM Hub is compatible with which communication protocol?

WiFi, Bluetooth (BLE), ZigBee, Thread / Matter (WIP).
Note: ZWave module is not by default available but an option is available to attach ZWave through USB or through a header pin inside the enclosure where one can attach RaZberry 7 module or AEOTEC Z-Pi 7.

Does it come with a preloaded Home Assistant Operating System (HAOS) version?

Yes, it comes preloaded with the latest HAOS version.

How do I Factory Reset the ATOM Hub device manually?

The device has a reset (RST) option available on the backside. You need to use a pin to insert and keep the button pressed for 5 seconds and release. This will reset the device. It might take up to 20 minutes to complete the device reset.
Note: Make sure it is connected to power and the internet via ethernet cable.

Does ATOM Hub come with one dedicated module of each ZigBee and Thread?

Yes, the device comes with one dedicated module of each ZigBee and Thread module.

What are the RTC Battery details that are compatible with ATOM Hub?

CR2032

What brands of smart devices are compatible with ClodPi Labs 'ATOM Hub for Home Assistant'?

It does support for all the integrations as provided by the Home Assistant community. Refer https://www.home-assistant.io/integrations/

How to get support for this product?

As of now, support will be available via email mode. You can send an email to support@clodpi.io mentioning the purchase Invoice Number and describing the issue. Our support team will contact you.

Show less